RHINO RC456 Betreibershandbuch PDF herunterladen (Seite 15)

5. Insert the Main Frame (33) into the Floating Arm (26). Lock the in place by installing the Lever Plate (16) on

the floating arm and secure with a pin and retaining rings. Insert a Lever Plate Pin (19) to lock the stop plate and

secure with a hairpin cotter. See Illustration 3.

Illustration 3

Illustration 4

6. Install the wheel Arms (34) in the main frame and secure the Lever Plates (16) with a pin and retaining rings and

a lever pin secured with a hairpin cotter . See Illustration 4, On 5WR and 5WL models, install a Center Wheel Arm

(49) in the main arm and secure with capscrews, lockwashers and nuts.

7. Using an overhead hoist or fork lift, carefully tip the assembly in the approximate position it will be in when

installed on the tractor and high enough off the ground to install the wheels. Install the wheels on the hubs using the

capscrews, lockwasher and nuts. The position of the teeth is determined by the direction of operation (See Illustra-

tion 5).

4WL TOP VIEW 4WR

6WL TOP VIEW 6WR

Illustration 6

When assembled, the rakes should be

configured as shown in Illustration 6.

5WL TOP VIEW 5WR

Illustration 6

(Contiuned)

Illustration 5

Left Rake

Right Rake

Rake wheels as viewed from the rear.

Illustration 6

(Contiuned)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Keine Kommentare

RHINO RC456 Betreibershandbuch Seite 15