RHINO RHINO FL20 Betreibershandbuch

FLEX-WING MECHANICAL LEVEL LIFTROTARY CUTTER /SHREDDERFL20 / FL14Published 10/03 Effective Serial No. FL 11400 Through Current P/N 00766693

FL20M/FL14M 10/03Safety Section 1-4© 2004 Alamo Group Inc.SAFETYSAFETYDANGER!Start tractor only when properly seated in the Tractor seat. Starting

OPERATIONOperation Section 4-14OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/036.2 Setting Deck PitchTo facilitate safe and efficient operation, the m

OPERATIONOPERATIONOperation Section 4-15© 2004 Alamo Group Inc.FL14/FL20 10/03When fitting the mower to the tractor, the telescoping driveline must b

OPERATIONOperation Section 4-16OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/03“Bottoming Out” Check Procedure1. Disconnect driveline from the tractor

OPERATIONOPERATIONOperation Section 4-17© 2004 Alamo Group Inc.FL14/FL20 10/0310 DEG.80 DEG.80 DEG.CONSTANT VELOCITY JOINT-MAXIMUM ANGLE CHECK7.2 Co

OPERATIONOperation Section 4-18OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/038. PRE-OPERATION INSPECTION AND SERVICEBefore each use, a pre-operatio

OPERATIONOPERATIONOperation Section 4-19© 2004 Alamo Group Inc.FL14/FL20 10/03DANGER!All Safety Shields, Guards and Safety devicesincluding (but not

OPERATIONOperation Section 4-20OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/03¾ Ensure the tractor PTO master shield is in place,lowered and in good

OPERATIONOPERATIONOperation Section 4-21© 2004 Alamo Group Inc.FL14/FL20 10/03¾ Ensure each hydraulic cylinder is installed andretained correctly. E

OPERATIONOperation Section 4-22OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/039. DRIVING THE TRACTOR AND MOWERSafe tractor transport requires the op

OPERATIONOPERATIONOperation Section 4-23© 2004 Alamo Group Inc.FL14/FL20 10/039.1 Starting the TractorThe procedure to start the tractor is model sp

Safety Section 1-5© 2004 Alamo Group Inc.SAFETYFL20M/FL14M 10/03SAFETYWARNING! Transport only at safe speeds. Serious accidents and injuries can

OPERATIONOperation Section 4-24OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/039.3 Operating the Mower WingsWings are positioned with hydraulic cylin

OPERATIONOPERATIONOperation Section 4-25© 2004 Alamo Group Inc.FL14/FL20 10/03Start off driving at a slow speed and gradually increase your speed whi

OPERATIONOperation Section 4-26OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/039.5 Crossing Ditches and Steep InclinesWhen crossing ditches with stee

OPERATIONOPERATIONOperation Section 4-27© 2004 Alamo Group Inc.FL14/FL20 10/0310. OPERATING THE TRACTOR AND MOWERTHE OPERATOR MUST COMPLETELY UNDERST

OPERATIONOperation Section 4-28OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/0310.2 Bystander/Passersby PrecautionsIf a bystander comes within 100 ya

OPERATIONOPERATIONOperation Section 4-29© 2004 Alamo Group Inc.FL14/FL20 10/03WARNING!Mow at the speed that you can safely operate and control the Tr

OPERATIONOperation Section 4-30OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/0310.5 Operating the MowerMow only in conditions where you have clear vi

OPERATIONOPERATIONOperation Section 4-31© 2004 Alamo Group Inc.FL14/FL20 10/03Stay alert and watch for trees, low hanging limbs, powerlines, and othe

OPERATIONOperation Section 4-32OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/03When mowing across uneven areas such as road shoulders, ditch edges, an

OPERATIONOPERATIONOperation Section 4-33© 2004 Alamo Group Inc.FL14/FL20 10/0310.6 Shutting Down the MowerTo shut down the mower, first bring the tr

FL20M/FL14M 10/03Safety Section 1-6© 2004 Alamo Group Inc.SAFETYSAFETYWARNING!Mow only in conditions where you have clear visibility in daylight or

OPERATIONOperation Section 4-34OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/03After disconnecting the mower hitch, remove themower driveline from the

OPERATIONOPERATIONOperation Section 4-35© 2004 Alamo Group Inc.FL14/FL20 10/0312. MOWER STORAGEProperly preparing and storing the mower at the end o

OPERATIONOperation Section 4-36OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/0313. TRANSPORTING THE TRACTOR AND MOWERBefore transporting the tractor

OPERATIONOPERATIONOperation Section 4-37© 2004 Alamo Group Inc.FL14/FL20 10/03Before transporting the tractor on a public roadway orboarding a traile

OPERATIONOperation Section 4-38OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/0313.1 Transporting on Public RoadwaysExtreme caution should be used whe

OPERATIONOPERATIONOperation Section 4-39© 2004 Alamo Group Inc.FL14/FL20 10/03Make sure that all tractor flashing warning lights,headlights, and brak

OPERATIONOperation Section 4-40OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/0313.2 Hauling the Tractor and MowerBefore transporting a loaded tractor

OPERATIONOPERATIONOperation Section 4-41© 2004 Alamo Group Inc.FL14/FL20 10/0314. TROUBLE SHOOTING GUIDEGear Box OverheatingTROUBLEExcessive Vibrati

OPERATIONOperation Section 4-42OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/03TROUBLE SHOOTINGTROUBLEGear Box NoisyClutch Slips ExcessivelyGear Box L

OPERATIONOPERATIONOperation Section 4-43© 2004 Alamo Group Inc.FL14/FL20 10/03TROUBLEOil Squirting from Breather VentHolePOSSIBLE REMEDYDo not carry

Safety Section 1-7© 2004 Alamo Group Inc.SAFETYFL20M/FL14M 10/03SAFETYWARNING!Many varied objects, such as wire, cable, rope, or chains, can become

MAINTENANCESECTIONMaintenance Section 5-1

Maintenance Section 5-2MAINTENANCEFL20MFL14M 10/03MAINTENANCE© 2004 Alamo Group Inc.Before operating your Rotary Cutter, make sure it is properly l

Maintenance Section 5-3MAINTENANCEFL20MFL14M 10/03MAINTENANCE© 2004 Alamo Group Inc.CENTER & WING GEARBOXESThe Gearboxes have been filled with

Maintenance Section 5-4MAINTENANCEFL20MFL14M 10/03MAINTENANCE© 2004 Alamo Group Inc.FIGURE 5 FIGURE 6GREASE EVERY8 HOURSGREASE EVERY8 HOURSDIVIDER

Maintenance Section 5-5MAINTENANCEFL20MFL14M 10/03MAINTENANCE© 2004 Alamo Group Inc.MAIN CV DRIVELINE SAFETY SHIELD (FIGURE 7)1. To remove Outer C

Maintenance Section 5-6MAINTENANCEFL20MFL14M 10/03MAINTENANCE© 2004 Alamo Group Inc.CAUTION Driveline Integral Shields must be in place at all time

Maintenance Section 5-7MAINTENANCEFL20MFL14M 10/03MAINTENANCE© 2004 Alamo Group Inc.PROTECTIVE, INTEGRAL SHIELDS - 55R 1000 RPM (WING DRIVELINES)Ve

Maintenance Section 5-8MAINTENANCEFL20MFL14M 10/03MAINTENANCE© 2004 Alamo Group Inc.BLADE SERVICINGInspect blades before each use to determine that

Maintenance Section 5-9MAINTENANCEFL20MFL14M 10/03MAINTENANCE© 2004 Alamo Group Inc.BLADE REMOVALTo remove blades for sharpening or replacement, re

FL20M/FL14M 10/03Safety Section 1-8© 2004 Alamo Group Inc.SAFETYSAFETYWARNING!Never leave Tractor and Implemented unattended while the implement is

Maintenance Section 5-10MAINTENANCEFL20MFL14M 10/03MAINTENANCE© 2004 Alamo Group Inc.TORQUE LIMITERAvoid overheating of the Torque Limiter by too l

Maintenance Section 5-11MAINTENANCEFL20MFL14M 10/03MAINTENANCE© 2004 Alamo Group Inc.8. Install driveline yoke onto shaft and install four bolts t

Maintenance Section 5-12MAINTENANCEFL20MFL14M 10/03MAINTENANCE© 2004 Alamo Group Inc.WHEEL BEARINGSEvery six months, the Wheel Hubs should be remov

Maintenance Section 5-13MAINTENANCEFL20MFL14M 10/03MAINTENANCE© 2004 Alamo Group Inc.*PROPER TORQUE FOR FASTENERSThe chart lists the correct tighte

701-SRW.PM4-92SERVIS-RHINOLIMITED WARRANTY1. LIMITED WARRANTIES1.01. Servis-Rhino warrants for one year from the purchase date to the original non-c

TO THE OWNER/OPERATOR/DEALERTo keep your implement running efficiently and safely, read your manual thoroughly and follow thesedirections and the Safe

FL20M-SOM-10/03Printed U.S.A.P/N 00766693C

SERVIS-RHINO®1020 S. Sangamon Ave.Gibson City, IL 60936-9907Please fold (do not tear), tape, and drop in any mailbox.PLEASE FILL OUT OWNER WARRANTY R

• I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Opera

Safety Section 1-9© 2004 Alamo Group Inc.SAFETYFL20M/FL14M 10/03SAFETYDANGER!There are obvious and hidden potential hazards in the operation of thi

• I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Opera

• I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Opera

FL20M/FL14M 10/03Safety Section 1-10© 2004 Alamo Group Inc.SAFETYSAFETYWARNING!Never unhitch without using the Tongue Jack. The Tongue isvery heav

Safety Section 1-11© 2004 Alamo Group Inc.SAFETYFL20M/FL14M 10/03SAFETYPARTS INFORMATIONServis-Rhino mowers use balanced and matched system compone

FL20M/FL14M 10/03Safety Section 1-12© 2004 Alamo Group Inc.SAFETYSAFETY741915221424271422242034CounterweightFor two-sectionCutter241134622234For tw

Safety Section 1-13© 2004 Alamo Group Inc.SAFETYFL20M/FL14M 10/03SAFETYITEM PART NO. QTY LEVEL DESCRIPTION1 00725746 1 PELIGRO Get Manual Translate

TO THE OWNER/OPERATOR/DEALERAll implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-mindedoperator wh

FL20M/FL14M 10/03Safety Section 1-14© 2004 Alamo Group Inc.SAFETYSAFETY9- - 0076065716--007636131- - 0072574617- - 0076397712- - D10312- - D11410 -

Safety Section 1-15© 2004 Alamo Group Inc.SAFETYFL20M/FL14M 10/03SAFETY8- - 00756494 20- - D13819- - D1375- - 007697366- - 0075605926 -- 0077128427

FL20M/FL14M 10/03Safety Section 1-16© 2004 Alamo Group Inc.SAFETYSAFETY23- - 99101 22- - D303 3- - 007560044- - 0075600511- - 9994032- - 00753

Safety Section 1-17© 2004 Alamo Group Inc.SAFETYFL20M/FL14M 10/03SAFETY18- - D10221- - D302FL2024-- D306FL1424-- 00766723FORAIRPLANETIRE --00762608

FL20M/FL14M 10/03Safety Section 1-18© 2004 Alamo Group Inc.SAFETYSAFETYSAFETYThis section is intended to explain in broad terms the concept and eff

In order to reduce accidents and enhance the safe operation of mowers, Alamo Group Ag Division, incooperation with other industry manufacturers has de

Alamo Group Ag. Division is willing to provideone (1) AEM Mower Safety Practices VideoPlease Send Me: VHS Format – AEM/FEMA Mower Operator Safety Vide

TABLE OF CONTENTSSAFETY SECTION ...

Introduction Section 2-1INTRODUCTIONSECTION

SAFETYSECTIONSafety Section 1-1

Introduction Section 2-2INTRODUCTIONFL20M/FL14M 10/03INTRODUCTION© 2004 Alamo Group Inc.Your FL 20 is a heavy-duty Cutter/Shredder designed primar

Assembly Section 3-1ASSEMBLYSECTION

Assembly Section 3-2FL20M/FL14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.Set up cutter as received from factory with these instructions. Refe

Assembly Section 3-3ASSEMBLYFL20M/FL14M 10/03ASSEMBLY© 2004 Alamo Group Inc.15 7 2,3,4FIGURE 2. Tongue Assembly/Level Rod Assembly1011,12,139TON

Assembly Section 3-4FL20M/FL14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.FIGURE 4. Wing Sections Attachments1234WING SECTIONS ATTACHMENTSWhil

Assembly Section 3-5ASSEMBLYFL20M/FL14M 10/03ASSEMBLY© 2004 Alamo Group Inc.LEVEL LIFT AXLE ATTACHMENT (FIGURE 6)Attach the Center Level Lift Axl

Assembly Section 3-6FL20M/FL14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.AXLE ADJUSTMENT ROD ATTACHMENTAttach the Axle Adjustment Rod w/Bushin

Assembly Section 3-7ASSEMBLYFL20M/FL14M 10/03ASSEMBLY© 2004 Alamo Group Inc.WING SECTION HYDRAULIC CYLINDER ATTACHMENTMount the 14" stroke H

Assembly Section 3-8FL20M/FL14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.FIGURE 10. Wheel Attachment

Assembly Section 3-9ASSEMBLYFL20M/FL14M 10/03ASSEMBLY© 2004 Alamo Group Inc.SPRING STOP ATTACHMENTThe Spring Stop is assembled to the stop bracke

FL20M/FL14M 10/03Safety Section 1-2© 2004 Alamo Group Inc.SAFETYSAFETYA safe and careful operator is the best operator. Safety is of primary impo

Assembly Section 3-10FL20M/FL14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.1,242,345,231,2FIGURE 14. Rear Wing Section Deflector Attachm

Assembly Section 3-11ASSEMBLYFL20M/FL14M 10/03ASSEMBLY© 2004 Alamo Group Inc.CHAIN GUARD ATTACHMENTThe placement of the Chain Guards corresponds

Assembly Section 3-12FL20M/FL14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.FIGURE 20DRIVELINE ATTACHMENTRemove Wing Nuts holding Divider Gearbo

Assembly Section 3-13ASSEMBLYFL20M/FL14M 10/03ASSEMBLY© 2004 Alamo Group Inc. R 09-27-01EQUAL ANGLE JACKSHAFT DRIVELINEAttach bearingsupport weld

Assembly Section 3-14FL20M/FL14M 10/03ASSEMBLYASSEMBLY© 2004 Alamo Group Inc.FIGURE 24 FIGURE 25FIGURE 26CANOPY SHIELDSAfter final adjustment att

Assembly Section 3-15ASSEMBLYFL20M/FL14M 10/03ASSEMBLY© 2004 Alamo Group Inc.LEFT WING LIFT CYLINDER RIGHT WING LIFT CYLINDERTHREE SPOOL CONTROL

OPERATIONSECTIONOperation Section 4-1© 2001 Alamo Group Inc.

OPERATIONOperation Section 4-2OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/03IMPORTANT: To avoid mower damage, retorque all bolts after the first 10

OPERATIONOPERATIONOperation Section 4-3© 2004 Alamo Group Inc.FL14/FL20 10/03READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION

Safety Section 1-3© 2004 Alamo Group Inc.SAFETYFL20M/FL14M 10/03SAFETYDANGER!Never operate the Tractor or Implement until you have read andcomplete

OPERATIONOperation Section 4-4OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/03Standard Equipment and SpecificationsHorsepower Required (Min.)... 7

OPERATIONOPERATIONOperation Section 4-5© 2004 Alamo Group Inc.FL14/FL20 10/031. OPERATOR REQUIREMENTSSafe operation of the rotary mower is the respo

OPERATIONOperation Section 4-6OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/032. TRACTOR REQUIREMENTSThe tractor used to operate the mower must have

OPERATIONOPERATIONOperation Section 4-7© 2004 Alamo Group Inc.FL14/FL20 10/032.4 DrawbarThe tractor drawbar must be positioned at a certainlength bas

OPERATIONOperation Section 4-8OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/03Never operate the Tractor and Mower if the Mower main driveline is direc

OPERATIONOPERATIONOperation Section 4-9© 2004 Alamo Group Inc.FL14/FL20 10/033. GETTING ON AND OFF THE TRACTORBefore getting onto the tractor, the o

OPERATIONOperation Section 4-10OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/034. STARTING THE TRACTORBefore starting the tractor ensure the followin

OPERATIONOPERATIONOperation Section 4-11© 2004 Alamo Group Inc.FL14/FL20 10/031. Ensure the tractor is equipped with the correct PTOshaft and the dra

OPERATIONOperation Section 4-12OPERATION© 2004 Alamo Group Inc.FL14/FL20 10/03Operating Mower Hydraulics with Two Tractor Hydraulic PortsThe lines th

OPERATIONOPERATIONOperation Section 4-13© 2004 Alamo Group Inc.FL14/FL20 10/03LEVELING DECK CENTER SECTION1. Place the tractor and mower on a level s