RHINO RC456 Betreibershandbuch PDF herunterladen (Seite 4)

SPECIFICATIONS

MODEL RC456

Weight (approximate) ............................................................................................. 585 Lbs.

Overall Width of Tool Bar w\Wings Extended ................................................................. 91"

Overall Length ........................................................................................................ 178 1/2"

Hydraulics............................................................................. Two-way Hydraulics Required

Rake capabilities ...................................................................... Two 4, 5, or 6 Wheel Rakes

Normal Tractor Speed .................................................................................... 15 to 20 MPH

*Do not transport or operate at speeds greater than Normal Tractor Speeds.

INTRODUCTION

The M&W Wheel Rake Carrier has been engineered and built for ease of operation and long service life. The M&W

RC456 Rake Carrier has been designed to transport and operate a pair of 4 Wheel, 5 Wheel, or 6 Wheel Rakes in a

V-type configuration.

It is important that you thoroughly understand the operation of the wheel rake carrier before use. Read through this

manual completely, watching especially for safety symbols (See Illustration Below) which will alert you to possible

hazards. The word "Note" will alert you to special information such as specifications, techniques, reference information

and other supplementary information. The word "Important" is used to point out a note which is of immediate and

urgent nature.

It is the users responsibility to read the operator's manual and comply with all instructions pertaining to operation and

maintenance. It is also the users responsibility to inspect the machine at regular intervals and repair or replace worn

or damaged parts when continued use would cause damage or excessive wear to other parts.

The manufacturer reserves the right to make changes, specifications, or improvements without incurring obligations

to add them to rake carriers sold before the changes.

When ordering parts for your rake carrier, please specify the part number and the name of the part as shown in the

parts section. Please give the serial number of the rake carrier, which is located on the rear of the main frame tube,

in all correspondence when referring to the rake carrier. Record the serial number and purchase date here for future

reference.

Serial No. _______________________ Model __________________________ Purchase Date _____________

Important: When this machine is traded or sold, make sure this manual accompanies the machine so future operators

will have complete operating instructions and safety warnings available to them.

Safety Symbol

1 2 3 4 5 6 7 8 9 ... 23 24

Keine Kommentare

RHINO RC456 Betreibershandbuch Seite 4