RHINO GTR Bedienerhandbuch Seite 4

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 13
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 3
4
Your Rhino Security system incorporates the latest in high security & convenience features. It is possible to
customise your security system so that it suits your requirements perfectly. Detailed below is the full list of
programmable features that can either be turned on or turned off.
We have set at the factory, the most common configuration chosen and these settings are listed in the
REGISTER Settings listed below. Once the desired features have been selected, the selection is permanently
retained in memory, even if power is removed.
To turn on or turn off any feature use the following procedure: eg to enable silent arming.
1. Arm then disarm the alarm system.
2. Within 20 seconds of disarming, turn the ignition key to on.
3. Press button 1 on the remote control (immediately after turning the ignition on) an
equal number of times to the selected feature’s code no. (eg 10 times for Audible
arm/disarm). Leave a 0.5 sec. gap between each press. The siren will chirp to confirm
each press.
4. Immediately turn the ignition to off after the last press.
5. The system will now confirm whether the feature has been turned on or off via visual
readout. One flash of the indicators means the feature is on. Two flashes means the
feature has been turned off.
PROGRAMMABLE
FEATURE
Press
Remote This
Many Times
Indication
INITIAL
FACTORY
SETTING
DESCRIPTION
Voltage Drop
(Current) Sensing
6 1 Flash On
2 Flash Off
OFF If deactivated, this feature will prevent the
alarm triggering via sensing a drop in
voltage in the vehicle’s electrical system.
This may be necessary where engine
thermo fans cut in automatically or there
are other accessories active even when
the ignition is turned off eg fridges, car
phones.
Passive Arming 7 1 Flash On
2 Flash Off
OFF The alarm can automatically arm itself 30
seconds after you leave your vehicle provided
that the ignition is turned off, and that at least
one door has been opened and closed ie. the
owner has parked and has exited the vehicle.
This feature will not lock the vehicle where
central locking is connected.
Auto Re-arm 8 1 Flash On
2 Flash Off
OFF If system is disarmed and a door is not
opened, or the ignition turned on within 60
seconds, the system will rearm & relock
(where central locking is connected).
Central Closure 9 1 Flash 0.8
2 Flash 5
sec
0.8 sec You can select the lock & unlock outputs to
become a 5 second negative pulse instead of
0.8 seconds. This feature is for certain
vehicles with vacuum central locking or those
with a central closure wire (some BMW,
Mercedes) ie doors lock, electric windows
wind up, sunroof closes automatically.
Audible
Arm/Disarm
10 1 Flash On
2 Flash Off
ON This feature when turned off, stops the
siren from beeping for arm & disarm
confirmation i.e. only the blinkers will flash.
Armin
g
Dela
y
12 1 Flash On 15 – 45 You can increase the armin
g
dela
y
p
eriod
Seitenansicht 3
1 2 3 4 5 6 7 8 9 ... 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare